dsh-plugin-sync

DSH PLUGIN开发与运行时

仓库 ltfysl/dsh-plugin-sync

开发与运行时 L5 · 运行验证通过 安全审查:低风险 可信度:金 可安装插件
安装这个插件

Plugin Sync 是一款 DSH 插件,把本地链接的插件打包进一个私密 GitHub gist,实现多机推送、拉取与自动同步。

一句话选型结论

按资料字段整理

dsh-plugin-sync 是开发与运行时类的 DSH 可安装插件,验证等级 L5 · 运行验证通过,安全审查为低风险,列出 5 项功能,有可直接复制的安装命令。验证通过不等于安全:插件会读写文件、执行命令或联网,装前先到仓库确认它做了什么;涉及密钥或系统权限的,建议先在隔离环境试装。

分类开发与运行时 收录类型可安装插件 验证等级L5 · 运行验证通过 安全审查低风险
验证等级 L5 L5 · 运行验证通过
GitHub 星标 0 复刻 0 · 未关闭 issue 未标注
最近更新 2026-11-10 创建于 2026-11-01
README 7.7 KB 正文体量,越大说明说明书写得越细

安装

可安装插件
在 DSH 里执行,装完用 dsh plugin list 确认已挂上;标了 L4 / L5 的命令已在沙盒里真实跑通
dsh plugin --profile web add github:ltfysl/dsh-plugin-sync#v0.2.0
  1. 1
    确认版本与运行环境

    兼容的 DSH 版本为 0.2.2-rc.1 等 2 个;版本不匹配时安装会报错。

  2. 2
    执行安装命令

    在 DSH 里执行上面的命令;多包仓库要注意区分具体子包名,别装错包。

  3. 3
    确认已挂载

    用 dsh plugin list 查看列表里是否出现这个插件,出现即挂载成功。

  4. 4
    试跑并检查权限

    加载后跑一个最小用例,确认它能正常工作;同时看它申请了哪些文件、命令或网络权限。

兼容 DSH 版本0.2.2-rc.1、0.2.1-rc.5版本不匹配时安装会报错
Node.js 要求未标注来自仓库 package.json 的 engines 字段
前置依赖无需要同时安装的同级依赖
npm 包名未发布到 npm可用 npm view 查看包信息

能做什么

5 项功能
字段来自项目仓库与公开索引,中文说明由本站标注

dsh-plugin-sync:用私密 gist 在多台机器间同步 DeepSeek Harness 本地插件

  • 选择要同步的本地插件
  • 创建或连接私密 gist
  • 手动 Push / Pull 同步
  • 每 15 秒自动推送变更
  • 拉取时自动安装缺失插件

适用场景

GitHub 集成存储

上游标签

deepseek-harnessdshdsh-plugingithub-gistplugin-sync

验证等级与安全审查

L5 · 运行验证通过
自动化流程结论,不是人工审核
验证等级L5 · 运行验证通过在 dsh 沙盒中完成安装与运行冒烟——装得上、跑得起来
安全审查低风险静态分析结论,未标注不代表已通过审查
仓库健康度活跃按仓库活跃度与最近更新时间给出
可信度金综合仓库活跃度与验证结果

上面的结论来自上游最近一次自动化验证(2026-11-05): 同一套检查会在插件发新版后重跑,页面显示的是最新一次的逐项结果。

逐项检查结果

L1 · 已找到 ✓ 通过
  • L1.0_DEFAULTED_FROM_L3 由 L3 推定 默认通过——L3 安装规范已通过(全库 L3 扫描策略)
L2 · 结构化 ✓ 通过
  • L2.0_DEFAULTED_FROM_L3 由 L3 推定 默认通过——L3 安装规范已通过(全库 L3 扫描策略)
L3 · 安装规范 ✓ 通过
  • L3.1_INSTALL_COMMAND_PARSED 安装命令已解析 方式:安装规范解析
  • L3.2_DSH_VERSION_DECLARED DSH 版本已声明 方式:DSH 版本声明
L4 · 安装已测 ✓ 通过
  • L4.1_INSTALL_EXECUTED_CONFINED 受限沙盒内执行安装 方式:沙盒安装执行
  • L4.2_INSTALL_SUCCESS 沙盒安装成功 方式:沙盒安装执行
  • L4.3_ARTIFACT_CONFIRMED 安装产物已确认 方式:沙盒安装执行
L5 · 运行已测 ✓ 通过
  • L5.1_INSTALL_PASSED_SANDBOXED 沙盒安装通过 方式:沙盒安装执行
  • L5.2_WEB_BOOT_READY Web 启动就绪 方式:Web 启动
  • L5.3_HTTP_SERVED HTTP 服务响应 方式:HTTP 请求
  • L5.4_PLUGIN_INVENTORY_ACTIVE 插件清单中已激活 方式:插件清单查询

风险详情

  • 结论说明 静态扫描 低;动态审计无结论(以下以静态为准)→ 总评级 低。
  • 风险计数 严重 0 / 高 0

选择建议

装之前先看这几条
按条目字段给出的判断,不替你决定用不用

值得选的地方

  • 验证等级 L5:安装和运行都在沙盒里跑通过,装完能直接用的概率高。
  • 静态安全审查为低风险,没有发现明显可疑行为。
  • 有可直接复制的安装命令,不用自己翻文档找入口。
  • 标注了兼容的 DSH 版本(0.2.2-rc.1 等 2 个),按版本装不容易报错。
  • 列出了 5 项功能,能直接看出它解决什么问题。

先想清楚的地方

  • 没有声明 Node.js 版本要求,版本不匹配可能装不上。
  • 验证通过不等于安全:插件会读写文件、执行命令或联网,装前先到仓库确认它做了什么。

更适合

  • 需要在开发与运行时场景里给 DSH 补能力的人。
  • 想装完就能用、不想自己排依赖的人。
  • 能接受在本地装依赖、愿意自己确认权限的人。

不太适合

  • 只使用 DSH 官方内置能力、不接受第三方插件的人。

同类对比

6 个同类
同分类里挑最接近的几条,字段以各自详情页为准
插件验证等级安全审查星标兼容版本安装命令
dsh-plugin-sync当前 L5 · 运行验证通过 低风险 0 0.2.2-rc.1 等 2 个 有
deepseek-harness L3 · 安装规范通过 低风险 24.6 万 未标注 无
rea L4 · 沙盒安装通过 低风险 2.6 万 0.1.1-rc.2 有
dsh-TUI L4 · 沙盒安装通过 中风险 4,292 0.1.7-rc.2 等 5 个 有
mirage L3 · 安装规范通过 低风险 3,681 未标注 无
dashi-taskboard L4 · 沙盒安装通过 低风险 3,311 0.1.1-rc.2 有

仓库档案

开发与运行时
字段来自项目仓库与公开索引,中文说明由本站标注
作者 / 维护方ltfysl仓库 dsh-plugin-sync · 默认分支 未标注
分类开发与运行时dev
收录类型可安装插件声明了 dsh.bundle、可用 dsh plugin add 安装的条目
开发语言JavaScript仓库主语言
许可证NOASSERTION商用或二次分发前请确认条款原文
星标 / 复刻 / issue0 / 0 / 未标注收录时的数值,非实时
创建 / 更新2026-11-01 · 2026-11-10最后推送 未标注
本站收录2026-11-02首次进入本站目录的时间

README 全文

7.7 KB
作者原文,中文版优先;只做安全转义,不改内容

Plugin Sync for DeepSeek Harness

Plugin Sync keeps linked local DSH plugins in one secret GitHub gist. Push from
one machine, pull them into another existing DSH profile, or let auto-push keep
the gist current while DSH is running.

  • Select which linked @local/* plugins belong in the gist.
  • Create a secret gist or connect an existing one.
  • Manual Push and Pull buttons.
  • Optional Auto-push every 15 seconds when selected source files change.
  • Pull installs missing plugins, updates the profile and runs pnpm install.
  • Choose the GitHub account inside the panel. ltfysl is preferred when that
    account is authenticated; otherwise the active gh account is used.

Install in an existing DSH

Requirements

  • An existing DeepSeek Harness installation with plugin support.
  • GitHub CLI (gh) installed and authenticated:
gh auth login --scopes gist
gh auth status

gist is the only scope Plugin Sync itself needs. The selected account needs
permission to create and edit the gist.

From GitHub

  1. Open DSH.
  2. Go to Plugins in the sidebar.
  3. Click Add plugin and choose Install a third-party plugin.
  4. Enter the repository address:
https://github.com/ltfysl/dsh-plugin-sync
  1. Install it and enable Plugin Sync if DSH asks.
  2. Restart DSH if the plugin does not appear immediately.
  3. Open Plugin Sync in the sidebar.

From a local checkout

Clone the repository and install the directory through the same dialog:

git clone https://github.com/ltfysl/dsh-plugin-sync.git

Then use Plugins → Add plugin → Install a third-party plugin and enter the
absolute path to the cloned directory. This is also the development workflow.

First sync

  1. Pick the GitHub account in the gist card. The default is ltfysl when that
    account is authenticated.
  2. Select the local plugins to keep in the gist.
  3. Click Create gist. This creates a secret gist and pushes the selection.
  4. Optionally enable Auto-push.

A connected gist belongs to the selected account. Switching accounts disconnects
the current gist so it can be created or connected under the new account.

Set up a new device

Plugin Sync runs inside DSH, so DSH itself must be installed there first — the
plugin cannot install DSH. The DSH CLI ships as the npm package
@deepseek-ai/dsh and needs
Node.js 24.9 or newer. Everything after that is checked for you: open the
Plugin Sync panel and the Device setup card appears when something is
missing, with the matching install command for macOS or Windows and a copy
button.

macOS

  1. Install Node.js and the DSH CLI:
brew install node
npm install -g @deepseek-ai/dsh

(The desktop app alone also works; the CLI is what dsh commands below
use.)

  1. In DSH: Plugins → Add plugin → Install a third-party plugin and enter
    https://github.com/ltfysl/dsh-plugin-sync — or, from a terminal:
dsh plugin --profile desktop add https://github.com/ltfysl/dsh-plugin-sync
  1. Open the Plugin Sync panel. If the setup card asks for it, run:
brew install gh && gh auth login --scopes gist
curl -fsSL https://get.pnpm.dev/install.sh | sh -
  1. Continue with Pull on another machine below.

Windows

  1. Install Node.js and the DSH CLI (PowerShell):
winget install OpenJS.NodeJS.LTS
npm install -g @deepseek-ai/dsh

(The desktop app alone also works; the CLI is what dsh commands below
use.)

  1. In DSH: Plugins → Add plugin → Install a third-party plugin and enter
    https://github.com/ltfysl/dsh-plugin-sync — or, from PowerShell:
dsh plugin --profile desktop add https://github.com/ltfysl/dsh-plugin-sync
  1. Open the Plugin Sync panel. If the setup card asks for it, run in
    PowerShell:
winget install --id GitHub.cli
gh auth login --scopes gist
irm https://get.pnpm.dev/install.ps1 | iex
  1. Continue with Pull on another machine below.

The panel finds gh and pnpm in their usual install locations (Homebrew,
~/.local/bin, PNPM_HOME, nvm, fnm, Volta, asdf, %LOCALAPPDATA%\pnpm on
Windows) even when DSH was launched with a minimal PATH. If a tool was
installed while DSH was already running, click Check again in the setup
card or restart DSH.

Pull on another machine

  1. Install Plugin Sync from this repository first. The plugin does not sync
    itself.
  2. Authenticate gh with the account that owns the gist.
  3. Connect the same gist URL or gist ID.
  4. Click Pull.
  5. Restart DSH.

Missing plugins are installed as managed copies under:

~/.dsh/plugin-sync/plugins/

The profile package.json gets a link: dependency and a bundle entry, then
pnpm install --ignore-scripts runs. Existing profile dependencies are skipped
by default. The pull dialog offers an explicit overwrite option; overwriting
repoints the existing profile entry to a fresh managed copy rather than editing
the original development checkout.

The sync plugin itself is never pushed or replaced by a pull. Install it once on
a fresh profile, then pull the rest.

What is synced

Only linked @local/* plugins with a dsh manifest are discovered.

Excluded:

  • .git, node_modules, .inspect, caches and coverage
  • .env*, .npmrc, .netrc, private keys and logs
  • symlinks

Limits:

  • 50 plugins
  • 400 files per plugin
  • 2 MB per file
  • 6 MB per plugin
  • 8 MB total

The gist contains one file, dsh-plugin-sync.json, with a versioned manifest:

{
"format": "dsh-plugin-sync",
"version": 1,
"plugins": [
{
"name": "@local/example",
"version": "1.0.0",
"files": [{ "path": "index.js", "encoding": "utf8", "content": "..." }]
}
]
}

Paths are validated during pull. Absolute paths, .., .git, node_modules
and symlinks are rejected or ignored.

Security

  • The gist is created as secret by default. Check its visibility on GitHub
    if you change it.
  • Plugin source is uploaded to GitHub. Review .env files and hardcoded secrets
    before pushing.
  • Pushing does not execute plugin code.
  • Pulling writes plugin source, runs pnpm install --ignore-scripts, and adds
    the plugin to the profile. The pulled code runs after the DSH restart.
  • GitHub tokens stay inside the gh child process. The browser never sees them.
  • Gist commands use the selected account's token without changing the globally
    active gh account.

Updating

Non-official plugins are updated by uninstalling and reinstalling them through
Plugins, as noted in the DSH install dialog. If you installed from a local
checkout, pull the repository and reinstall or restart the local bundle.

Development

node --test

The package is @local/dsh-plugin-sync with version 0.3.0. Its Host half uses
authenticated Web routes under /plugin-sync; the Client half is a plain DSH
Web bundle with a sidebar panel and main view.

Troubleshooting

  • No authenticated account: run gh auth login --scopes gist, then reopen
    the panel.
  • Gist not found after switching accounts: connect or create the gist under
    the newly selected account.
  • Pull installed plugins but they are missing: restart DSH. If that does
    not help, pnpm may not have been reachable from DSH — install pnpm, then
    pull again; the pull re-links the affected plugins automatically.
  • pnpm warning after pull: run pnpm install manually in the profile
    directory shown by DSH, then restart. DSH launched from the desktop finds
    pnpm and gh in the usual install locations (~/.local/bin, Homebrew,
    version managers) even when they are not on its own PATH.

常见问题

8 问
答案由本站依据条目字段整理,不引用上游原文
dsh-plugin-sync 怎么安装?

在 DSH 里执行 `dsh plugin --profile web add github:ltfysl/dsh-plugin-sync#v0.2.0` 即可。

dsh-plugin-sync 的验证等级是什么意思?

L5 · 运行验证通过。在 dsh 沙盒中完成安装与运行冒烟——装得上、跑得起来

dsh-plugin-sync 安全吗?

低风险。静态扫描 低;动态审计无结论(以下以静态为准)→ 总评级 低。

dsh-plugin-sync 装之前要先确认什么?

先看它会读写哪些文件、执行哪些命令、连接哪些网络地址;验证等级只说明装得上、跑得起来,不等于安全。涉及密钥或系统权限的,建议先在隔离环境试装。

dsh-plugin-sync 支持哪些 DSH 版本?

上游记录的兼容版本包括 0.2.2-rc.1、0.2.1-rc.5。

dsh-plugin-sync 用的是什么许可证?

上游标注为 NOASSERTION。商用或二次分发前请到仓库确认许可证原文。

dsh-plugin-sync 有哪些功能?

选择要同步的本地插件、创建或连接私密 gist、手动 Push / Pull 同步、每 15 秒自动推送变更、拉取时自动安装缺失插件。

这条记录的数据可靠吗?

本站按仓库名去重后合并整理,字段以作者仓库与 npm 元数据为准;安装命令、仓库地址与 README 保持原文,带 L4 / L5 标记的安装命令已在隔离沙盒里真实跑通。

同名或近似条目

3 条
不同作者的仓库分开列,请确认你要装的是哪一个
开发与运行时
按星标排序,可作替代方案

rea

rea

L4 · 沙盒安装通过 2.6 万 星

dsh-TUI

dsh-TUI

Claude Code 风格全屏终端 UI:像素鲸鱼顶栏、实时工作状态行、思考流式展开。

L4 · 沙盒安装通过 4,292 星

mirage

mirage

把文件系统与 bash 提供者换成 mirage 虚拟工作区:文件工具与 shell 命令作用于挂载的资源(RAM、S3、Redis、Sla

L3 · 安装规范通过 3,681 星

dashi-taskboard

dashi-taskboard

把当前已安装并运行中的 Codex Taskboard 嵌入 DeepSeek Harness 侧边栏,并通过 Launcher 运行时描述

L4 · 沙盒安装通过 3,311 星

ltfysl 的其它插件

1 个

插件的元信息来自作者仓库;分类、验证等级与安全结论的中文说明为中文整理,最近核验 2026-11-05。